{"title":"Steering Systems","description":"\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/wood_03.png?v=1655272476\" alt=\"\" data-mce-fragment=\"1\" data-mce-src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/wood_03.png?v=1655272476\"\u003e\n\u003cp\u003eWoodward Steering Systems design, build and supply custom-designed power steering racks for the most demanding racing applications in the world, including V8 Supercars, NASCAR, and even the USA military. Racer Products are proud to be the exclusive Asia-Pacific Distributors for Woodward, which include welded steering columns which are the only aftermarket LVVTA-approved columns in NZ. Perfect for road, race and rally cars.\u003c\/p\u003e","products":[{"product_id":"psm-max-extended-spherical-bearing-crmo-inner-tie-rods-for-s14","title":"PSM MAX Extended Spherical Bearing CrMo inner tie rods for S14","description":"\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Inner tie rods\u003c\/p\u003e\n\u003cp\u003eWhen running extended control arms, you need extended tie rods. These 298mm long tie rods are 27mm longer than OEM S14 inner tie rods. Good option for Z33 with extended control arms. Fits 1992-1993 FD RX7 with exteded control arms. This set is included in our FRS angle kit, but sold separately here. Great upgrade for S13 if you pair with S14 outer tie rods\u003cbr\u003e~Strong CrMo construction with pillowball inner joints\u003cbr\u003e~ 7mm built in rack spacers give more rack travel and noticable increase in steering angle\u003cbr\u003e~ 7mm longer m16p1.0 rack threads guarantee proper thread engagement into the rack\u003cbr\u003e~ 20mm longer threads on the tie rod end\u003cbr\u003e~ Sold in pairs\u003cbr\u003e~ We offer 3 inner tie rod lengths \u0026amp; the chart below lists all of the combinations. ~Note**Has less bearing travel than OEM tie rod(18 degrees vs. 28 center to max)due to double the shaft size for strength, so this should be combined with coilover suspension only. All lengths are in millimeters from end of rack to end of tie rod thread, or when our inner and outer are combined\u003cbr\u003e~ rack to OTR joint center. When using RSPCR rack to inner tie rod forward offset spacer add 35mm.\u003c\/p\u003e\n\u003c!----\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":40746323509350,"sku":"SCR PSM ITR","price":173.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/products\/54220_PriceBreak_41011.jpg?v=1708043528"},{"product_id":"psm-super-angle-knuckle-s13-w-oem-spindle-position","title":"PSM Forged Super Angle Knuckles for S13 (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles\u003c\/p\u003e\u003cp\u003eQuick, high angle steering. Snappy, high impact transitions. Dramatically improved handling on lowered cars. This is our famous Forged Super Angle Knuckle with roll center correction.\u003cbr\u003e~ Forged steel with CNC finished mounting surfaces for strength and symmetry.\u003cbr\u003e~ Gold Zinc Plated\u003cbr\u003e~ 45mm roll center and bump steer correction\u003cbr\u003e~ quick steering ratio\u003cbr\u003e~ up to 70 degrees of angle when equipped with our full front end set of supporting parts\u003cbr\u003e~ Approx 4 to 8.5 degrees ackerman at high angle depending on rack location or use of offset rack spacers. Offers a natural driving feel\u003cbr\u003e~ This is a brand new part ready to bolt on with no core charge, no modification to your OEM knuckle, no two way shipping fees, no down time\u003cbr\u003e~ S13 has a 30mm spindle and S14 is a 34mm spindle, They also differ in the FLCA taper, hub compatibility, and coilover hardware is M12 on S13, M14 on S14. If you put an S14 knuckle on S13 you'll drill your coilover lower mount holes bigger \u0026amp; you'll be mising a spindle nut washer we sell separately. ~Compatible with OEM tapered outer tie rods or MAX part # OTRT and OTRLBT.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41499308916838,"sku":"SCR PSM SAKS13","price":870.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/bd42a2f62025d8e472670cf936e3e670_20_20.jpg?v=1759975264"},{"product_id":"psm-forged-aluminum-super-angle-roll-center-drop-knuckles-for-z33-g35-1","title":"PSM Forged aluminum Super Angle, Roll Center, Drop Knuckles for Z33 G35","description":"\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Knuckles\u003c\/p\u003e\u003cp\u003eNew forged drop knuckles can be added to your MAX super angle kit to drastically improve overall handling.\u003cbr\u003eRoll center and bump steer are improved\/corrected on lowered vehicles.\u003cbr\u003eBolt these on and restore the handling on your lowered Z! Or... you can use these to lower the front of the car beyond the normal range of your coilovers.\u003cbr\u003e****Please note the Z33SAK lower parts set we sell and Z33 Front Upper Arms are prerequisites for the new forged knuckle.\u003cbr\u003eYou must buy the other parts to use this knuckle. This knuckle will not bolt onto the car without our Z33SAK lower parts set and Z33FUA upper arm.\u003cbr\u003eAlthough the lower parts set can be used by itself and the upper arm can be used by itself, our knuckle requires all those things to be installed at the same time. These are drop knuckles and will require you to raise your coilovers to maintain your current ride height.\u003cbr\u003eIf your coilovers are already maxed out at the highest setting, you will need to modify your lower mounts to acheive a longer coilover length.\u003cbr\u003eThese will allow you to set a lower ride height than normal if desired.\u003cbr\u003eYou will swap your OEM ball joint to this new knuckle.\u003cbr\u003eOuter tie rods included with the super angle kit lower parts set will now be bolted straight to this knuckle.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41829965594726,"sku":"SCR PSM Z33SAKN","price":1741.59,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54723_PriceBreak_41513.jpg?v=1759975620"},{"product_id":"psm-z34-inner-tie-rods-for-370z-angle-kit-crossmember-mod-order-in","title":"PSM Z34 inner tie rods for 370Z angle kit \u0026 crossmember mod (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Inner tie rods\u003c\/p\u003e\u003cp\u003eExtended CrMo spherical bearing inner tie rods for the 370Z \/ G37 for use with extended lower control arms.\u003cbr\u003eThese tie rods are 11.5\" long from rack to tip.\u003cbr\u003eSo they are only compatible with extended arms \/ MAX angle kit when not using a rack spacer.\u003cbr\u003e~ M18p1.0 rack thread\u003cbr\u003e~ 7mm built in rack shaft spacers give extra rack throw\u003cbr\u003e~ Sold in pairs.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837316538470,"sku":"SCR PSM Z34ITR","price":217.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_11.jpg?v=1759975710"},{"product_id":"psm-z34-370z-g37-rack-forward-crossmember-center-section-order-in","title":"PSM Z34 370Z G37 rack forward crossmember center section (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Steering rack Relocation kit\u003c\/p\u003e\u003cp\u003eOn drift cars with a rear mounted steering rack, like the Z, it is important to position the steering rack forward when you drastically increase your steering angle.\u003cbr\u003eThis will help you acheieve more useable steering angle with smoother steering feel and less binding\/overcentering.\u003cbr\u003eThis DIY weld-in kit will Move your steering rack forward 40mm.\u003cbr\u003eThis will allow you to delete the inner tie rod offset spacers commonly provided with angle kits.\u003cbr\u003eOffset spacers are an easy solution for preventing overcentering.\u003cbr\u003eBut they are a weak link in the steering system and add stress to the steering rack. Relocating the entire rack is the better solution.\u003cbr\u003eOur weld-in FD legal solution maintains an uninterupted span across the subframe while only changing the rack mounting provisions.\u003cbr\u003eLaser scanned, CAD designed, Laser cut, CNC press brake bent 1\/4\" aluminum and 3\/16\" steel plate with all hardware included.\u003cbr\u003eCheck the social media posts tagged #Z34CS for step by step instructions and installation shots \u0026amp; advice.\u003cbr\u003e***Following parts are also required for installation and are all sold separately:\u003cbr\u003e~ Z34 extended inner tie rods, if using 370Z or G37 steering rack.\u003cbr\u003eS14 extended inner tie rods if using 06+ M35 steering rack\u003cbr\u003e~speed sensitive solenoid delete fitting to allow rack to move forward without solenoid interfering.\u003cbr\u003eOptional Steering column shaft extender may be needed when rack is moved forward.\u003cbr\u003eOur solid aluminum rack bushings are a good addition and sold separately.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837464649830,"sku":"SCR PSM Z34CS","price":1153.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_12.jpg?v=1759975712"},{"product_id":"psm-steering-intermediate-shaft-extension-for-nissan-toyota","title":"PSM Steering intermediate Shaft Extension for Nissan \u0026 Toyota","description":"\u003cp\u003eParts Shop Max Steering intermediate Shaft Extension for Nissan \u0026amp; Toyota\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Steering rack extension\u003c\/p\u003e\u003cp\u003eAdds 35mm to the steering shaft for use when relocating the steering rack forward so the steering column will reach the steering rack.\u003cbr\u003eThis is a convenient and popular option in cart when ordering the S13 S14 Z33 \u0026amp; Z34 rack forward crossmember center section kits.\u003cbr\u003eCompatible with many other 0.688\"\/17.5mm OD 36 tooth steering systems including GT86, IS300, GS300 and even many trucks with body lifts like 4runner, Hilux, Hardbody pickups. etc.\u003cbr\u003eWe are now we are making it available separately, right here.\u003cbr\u003eThe precision of the splines made using the die-sinking Electrical Discharge Machining process allows this hardened steel part to be made in one piece unlike other cheap examples out there for truck body lift kits.\u003cbr\u003eFor drifting, it’s important to move the rack forward to get good steering leverage against knuckles that double the OEM steering angle.\u003cbr\u003eWe also have tie rod offsetters but the rack forward mod has a strength advantage \u0026amp; protects the rack.\u003cbr\u003eSolid rack mounts in the Center Section mods help steering response as well.\u003cbr\u003eIt’s a lot of effort to do the CS (or rack mod) so this extension adds a quick piece to the puzzle, saving time on cutting and extending the steering intermediate shaft for maximum spline overlap.\u003cbr\u003eIf fabricators out there who dont use our center section have trouble getting the rack as far forward as we do, its ok to cut the spline length down on the shaft and\/or hammer in the collapseable crash protection feature while still maintaining perfect spline overlap using this extension.\u003cbr\u003e0.688\"\/17.5mm OD 36 tooth male, \u0026amp; female clamp gap accepts one filled spline on the intermediate shaft.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837525893222,"sku":"SCR PSM SSE","price":185.04,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/55279_PriceBreak_42070.jpg?v=1759975714"},{"product_id":"psm-2006-z33-z34-speed-sensitive-power-steering-delete-fitting","title":"PSM 2006+ Z33 \u0026 Z34 Speed Sensitive Power Steering Delete Fitting","description":"\u003cp\u003eListing is for:\u003cbr\u003e1x Delete fitting\u003c\/p\u003e\u003cp\u003eSmooth out your power steering feel AND make clearance for a rack forward relocation mod.\u003cbr\u003eThe OEM speed sensitive power steering solenoid bypasses the hydraulic assist pressure and diverts it back to the reservoir which makes steering more difficult, however in drift cars with double the steering angle, the leverage of the shortened knuckle makes it harder to steer and it requires more than the usual level of power steering assist force to easily and precisely control the car.\u003cbr\u003eIn motor swapped situations if you simply unplug the solenoid there is no variable of speed but you're stuck at some level of limp mode assist thats not 100% so when you use our solenoid delete fitting, you get full power steering all the time which is perfect for drifting.\u003cbr\u003eSold individually.\u003cbr\u003e*Unless you grind a 27mm wrench down to 5mm width its pretty hard to get the solenoid off so we spot welded the housing to the base and then its removed pretty easily by turning the housing thats normally free to spin.\u003cbr\u003eInstallation of the fitting is a snap, just get a little steering fluid on the O-rings \u0026amp; tighten it down.\u003cbr\u003e*This is required before you can mount the rack into our upcoming rack forward crossmember center section for engine mount clearance.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837560397926,"sku":"SCR PSM Z33SSPSDF","price":54.42,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/55284_PriceBreak_42075.jpg?v=1759975717"},{"product_id":"psm-rack-to-inner-tie-rod-forward-offset-spacers","title":"PSM Rack to inner tie rod Forward offset spacers (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of offset steering rack spacers\u003c\/p\u003e\u003cp\u003eFits S14\/S15\/Z33\/some S13. This CNC steel offset spacer adjusts the pivot point of the inner tie rod forward 36mm and features a black zinc coating.\u003cbr\u003eIt is for cars with high caster setting and high steering angle that causes severe over centring making the steering wheel hard to turn as the tie rod looses leverage at full lock.\u003cbr\u003eThis offset spacer does cause some stress on the steering rack itself, so for all but the most extreme caster setting the eccentric steering rack bushing or Rack Relocation is the preferred method of reducing overcentering.\u003cbr\u003eSold by the pair.\u003cbr\u003eEarly S13 rack can use this product if cut new notches in the end of the rack to aim these forward.\u003cbr\u003e*If used with eccentric rack bushings (4-5mm forward) you must grind the FLCA mounting nut\/bolt in half.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837993721958,"sku":"SCR PSM RSPCR","price":250.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/3246a36ebaab1609f29f81eaf8039ccd_20_7.jpg?v=1759975726"},{"product_id":"psm-fc-rack-angle-spacers-1","title":"PSM FC3S RX7 Steering Rack Angle Spacers","description":"\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of steering rack spacers\u003c\/p\u003e\u003cp\u003e~ Pair of steering rack spacers for FC RX7 with power steering. This spacer set is included in our super angle kit. But offered here separately for people using other extended control arms or extended ball joint kits.\u003cbr\u003e~Adds 45mm additional tie rod length so the OEM tie rods will reach the knuckles when LCA's are extended.\u003cbr\u003e~Adds 15mm more steering rack motion per side for more steering angle.\u003cbr\u003e~CNC steel with black EPD coating\u003cbr\u003e~M14x1.5 thread.\u003cbr\u003e~NOT for use with manual steering rack. Will NOT thread into manual rack.\u003cbr\u003e~Sold as a pair.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837994377318,"sku":"SCR PSM FCRSPCR","price":87.08,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54391_PriceBreak_41182.jpg?v=1759975728"},{"product_id":"psm-rack-to-inner-tie-rod-forward-offset-spacer-s13-mfg-date-7-1988-7-1991","title":"PSM Rack to inner tie rod Forward offset spacer S13 Mfg. Date 7\/1988 - 7\/1990","description":"\u003cp\u003eParts Shop Max Rack to inner tie rod Forward offset spacer S13 Mfg. Date 7\/1988 - 7\/1990\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of steering rack spacers\u003c\/p\u003e\u003cp\u003eFits early model S13 Silvia, 240SX,180SX.\u003cbr\u003eThis CNC steel offset spacer adjusts the pivot point of the inner tie rod forward 36mm and features a black zinc coating.\u003cbr\u003eIt is for cars with high caster setting and high steering angle that causes severe over centring making the steering wheel hard to turn as the tie rod looses leverage at full lock.\u003cbr\u003eThis offset spacer does cause some stress on the steering rack itself so for all but the most extreme caster setting the eccentric steering rack bushing or Rack Relocation is the preferred method of reducing overcentering on s chassis with angle modified steering knuckles.\u003cbr\u003eSold by the pair.\u003cbr\u003e*If used with eccentric rack bushings (4-5mm forward) you must grind the FLCA mounting nut\/bolt in half.\u003cbr\u003e**INSTALLER MUST VERIFY POSITION OF NOTCHES IN THE END OF THE STEERING RACK.\u003cbr\u003eS13 OFTEN HAS NON-ORIGINAL RACK AND MAY REQUIRE LATER MODEL RACK SPACERS.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837994442854,"sku":"SCR PSM RSPCRS13","price":250.35,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54876_PriceBreak_41667.jpg?v=1759975730"},{"product_id":"psm-rack-to-itr-forward-offset-spacers-w-cross-member-plates-for-is-gs-jzx","title":"PSM Rack to ITR Forward Offset Spacers w\/ cross member plates for IS\/GS\/JZX (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of offset steering rack spacers\u003c\/p\u003e\u003cp\u003eDesigned in partnership with Daigo Saito of Fat Five Racing for use on his ground breaking MarkII jzx100 chassis, and also compatible with the IS300\/Altezza\/JZX90\/JZX100\/JZX110\/JZS160 GS.\u003cbr\u003eRack to tie rod 36mm forward offset spacer set adds angle through increased rack throw and prevents steering lock up (over centring) at high steering angles by assisting the tie rod's leverage over the knuckle.\u003cbr\u003eDesigned to be paired with high angle modified steering knuckles. Adjusts the pivot point of the inner tie rod forward 36mm which requires a notch in the cross member on IS300\/JZX100, filled by the supplied plates.\u003cbr\u003eAllows SXE and JZX chassis cars to a higher caster setting without severe over centring.\u003cbr\u003eThis offset spacing does cause some stress on the steering rack so full steering rack relocation is the preferred method. But these are a simple bolt on solution. Sold by the pair.\u003cbr\u003e***Requires a notch to the crossmember and welding on IS\/JZX100.\u003cbr\u003eNo notching needed on JZX90\/GS\/Aristo.\u003cbr\u003eThese spacers increase the overall tie rod length.\u003cbr\u003eSo you will need to address the tie rod fitment in relation to the control arm length.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41837994672230,"sku":"SCR PSM SXE10RSPCR","price":261.24,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/62366_PriceBreak_51183.jpg?v=1759975733"},{"product_id":"psm-z33-350z-g35-steering-rack-solid-bushing-set-order-in","title":"PSM Z33 350Z G35 Steering Rack Solid Bushing set (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Set of steering rack bushes\u003c\/p\u003e\u003cp\u003e4 Piece CNC machined solid aluminum bushings press (or hammer) fit into the drivers side of the rack after the OEM busings are easily pounded out using an extension, big socket \u0026amp; hammer.\u003cbr\u003eTheir low price and dramatic increase in steering response makes this a must do item.\u003cbr\u003eCompatible with the OEM or Urethane passenger side bracket mount, and adds needed stiffness regardless of whats used on the other side.\u003cbr\u003eCheckout the install video at the social links below and make sure to pair this with our speed sensitive power steering delete for drifting a model year 2006+ 350z. **This part is already included in our rack forward crossmember kit**\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41841411457126,"sku":"SCR PSM Z33SRSB","price":152.39,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_16.jpg?v=1759975747"},{"product_id":"psm-z34-370z-g37-q50-m35-steering-rack-solid-bushing-set-order-in","title":"PSM Z34 370Z G37 Q50 M35 Steering Rack Solid Bushing set (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Set of steering rack bushes\u003c\/p\u003e\u003cp\u003e4 piece CNC machined solid aluminum bushings press fit into the OEM rubber bushing sleeves.\u003cbr\u003e**This part is already included in our rack forward crossmember kit** Fits Z34 370Z, G37 coupe and sedan, Q50, Q60, 2006+ M35\/45\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41841442750566,"sku":"SCR PSM Z34SRSB","price":152.39,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_17.jpg?v=1759975749"},{"product_id":"psm-limit-break-trailing-spindle-ackerman-adjustable-knuckle-s13","title":"PSM Limit Break Trailing Spindle Ackerman Adjustable Knuckle S13 (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles with ackerman plates\u003c\/p\u003e\u003cp\u003eDeveloped for use in Formula Drift competition.\u003cbr\u003e~ Forged steel with CNC finished mounting surfaces for strength and symmetry.\u003cbr\u003e~ 45mm roll center and bump steer correction\u003cbr\u003e~ Up to 70 degrees of angle when equipped with our full front end set of supporting parts\u003cbr\u003e~ Designed for use with a low static caster setting, the railing spindle smooths out steering inputs \u0026amp; restores some of the self steer usually lost in low caster settings.\u003cbr\u003e~ Slower steering than our standard super angle knuckle for consistency \u0026amp; stability during high speed drifting.\u003cbr\u003e~ 6 settings of ackerman adjustment to suit your style whether its running faster through the course (more ackerman) or crab walking through the straightaway (zero ackerman)\u003cbr\u003e~ S13 has a 30mm spindle and S14 is a 34mm spindle, They also differ in the FLCA taper, hub compatibility, and coilover hardware is M12 on S13, M14 on S14.\u003cbr\u003eIf you put an S14 knuckle on S13 you'll drill your coilover lower mount holes bigger \u0026amp; you'll be missing a spindle nut washer we sell separately.\u003cbr\u003e~ This is a brand new part ready to bolt on with no core charge, no modification to your OEM knuckle, no two way shipping fees, no down time.\u003cbr\u003e**Cannot be used with tapered outer tie rod.\u003cbr\u003eMust convert to 14mm straight through bolt and rod end outer tie rods (MAX part # OTR and OTRLB)\u003cbr\u003e**Must be paired with a highly adjustable front suspension system to properly position the wheels when using trail spindles. Our Limit Break Angle Kit is recommended along with forward steering rack relocation.\u003cbr\u003eWheels will be moved back in the wheel wells.\u003cbr\u003eRecommended static caster setting is approx 4.5 degrees.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41861110431846,"sku":"SCR PSM SAKS13LB","price":1088.5,"currency_code":"NZD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/3246a36ebaab1609f29f81eaf8039ccd_20_22.jpg?v=1759975861"},{"product_id":"psm-limitbreak-outer-tie-rods-with-taper","title":"PSM S14 LimitBreak Outer Tie Rods with OEM style Taper","description":"\u003cp\u003eParts Shop Max S14 LimitBreak Outer Tie Rods with OEM style Taper\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of outer tie rods\u003c\/p\u003e\u003cp\u003eThe tapered limitbreak OTR was created for use with S13, S14 and S15 knuckles that still use a tapered hole, such as modified OEM knuckles or our Standard forged super angle knuckles.\u003cbr\u003eBut these outer tie rods are longer than stock for use with extended control arms. ~Replaceable PTFE lined high misalignment outer heim joints.\u003cbr\u003e~Replaceable Chromoly taper rods for S-chassis knuckles\u003cbr\u003e~CNC aluminum sleeves with M14x1.50 threads for compatibility with common Nissan inner tie rods (S13's must upgrade to S14 inner tie rods)\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41861743870054,"sku":"SCR PSM OTRLBT","price":315.66,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_33.jpg?v=1759975863"},{"product_id":"psm-s13-rack-forward-crossmember-center-section","title":"PSM S13 rack forward crossmember Center Section (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x steering rack relocation kit\u003c\/p\u003e\u003cp\u003e*Steering Shaft Extension, Part number SSE is sold separately\u003cbr\u003e*Now with triple clamps \u0026amp; compatibility on both RHD \u0026amp; LHD racks!\u003cbr\u003eDriftCave collaboration FormulaDrift legal rack forward center section \u0026amp; crossmember modification service is available now, after abuse testing was completed on Matt Field’s FDs14.\u003cbr\u003eThis has 3 steps of forward adjustment to increase steering leverage \u0026amp; decrease Ackerman without offsetting the ITR, up to 40mm in front of the OEM position!\u003cbr\u003eThe high surface area T bolt clamps are very thin to provide #LSx V8 swap oil pan clearance, even on s13 while preventing the rack from twisting or being crushed from clamping force.\u003cbr\u003eThis will allow the rack to be swapped during a five minute time out \u0026amp; the clamp brackets themselves serve as a replaceable crash energy absorption point, saving the increasingly rare rack and crossmember from damage by minor incident.\u003cbr\u003eThe rack height can also be dropped 10mm to clear #1JZ \u0026amp; #2JZ swaps.\u003cbr\u003eThe center section is available from Parts Shop MAX as a DIY kit only so you’ll need a fab shop to brace the SF frame mounting points, cut the middle out \u0026amp; align our parts with holes in the bottom plane of the SF, and weld in the bar \u0026amp; plates.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41861802590310,"sku":"SCR PSM S13CS","price":576.9,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_34.jpg?v=1759975865"},{"product_id":"psm-max-steering-rack-eccentric-bushing-set-for-s13","title":"PSM MAX Steering Rack Eccentric Bushing set for S13 (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of steering rack bushes\u003c\/p\u003e\u003cp\u003e~ Eccentric design moves steering rack forward slightly\u003cbr\u003e~ Prevents over centring of tie rod and knuckle to prevent heavy steering at lock\u003cbr\u003e~ Takes ackerman curve from digressive to progressive difference while decreasing overall ackerman\u003cbr\u003e~ Gold anodised aluminum construction\u003cbr\u003e~ For S13 and R32 steering rack tubes which are 48mm OD\u003cbr\u003e**Install note: Overtightening passenger side mount can crush stering rack tube. Carefully snug passenger side rack mount.\u003cbr\u003eYou will tighten the driver side mount around the cast portion of the rack firmly to secure rack in place.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41861812093030,"sku":"SCR PSM SREBS13","price":152.39,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54540_PriceBreak_41331.jpg?v=1759975868"},{"product_id":"psm-max-steering-rack-eccentric-bushing-set-for-s14-s15","title":"PSM MAX Steering Rack Eccentric Bushing set for S14\u0026S15 (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of steering rack bushes\u003c\/p\u003e\u003cp\u003e~ Eccentric design moves steering rack forward slightly\u003cbr\u003e~ Helps Prevent over centering of tie rod and knuckle to prevent heavy steering at lock\u003cbr\u003e~ Takes ackerman curve from digressive to progressive difference while decreasing overall ackerman\u003cbr\u003e~ Gold anodized aluminum construction\u003cbr\u003e~ For S14 steering rack tubes which are 45mm OD\u003cbr\u003e~ install pix: http:\/\/partsshopmax.com\/e107_plugins\/forum\/forum_viewtopic.php?4772.40\u003cbr\u003e**Install note: Overtightening passenger side mount can crush steering rack tube. Carefully snug passenger side rack mount.\u003cbr\u003eYou will tighten the driver side mount around the cast portion of the rack firmly to secure rack in place.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41861815861350,"sku":"SCR PSM SREBS14","price":152.39,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/PSM_SREBS14_4926f66e-83ff-447c-b841-062db4bc5ece.jpg?v=1763495363"},{"product_id":"psm-short-spherical-bearing-crmo-inner-tie-rods-1","title":"PSM SHORT Spherical Bearing CrMo inner tie rods","description":"\u003cp\u003eParts Shop Max SHORT Spherical Bearing CrMo inner tie rods\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Inner tie rods\u003c\/p\u003e\u003cp\u003e~CrMo contruction and pillowball inner joint for much greater strength compared to stock tie rods.\u003cbr\u003eThis is shorter than OEM S-chassis tie rod.\u003cbr\u003eThis is 15mm longer than OEM Z33, so would be a good choice for use on Z33 with slightly extended track width or just for more thread overlap between inner and outer tie rods.\u003cbr\u003e~ 7mm built in rack spacers give more rack travel and a noticeable increase in steering angle\u003cbr\u003e~ 7mm longer m16p1.0 rack threads\u003cbr\u003e~Note**Has less bearing travel than OEM tie rod (18 degrees vs. 28 center to max) due to double the shaft size for strength, so this should be combined with coilover suspension only.\u003cbr\u003e~ rack to OTR joint center. When using RSPCR rack to inner tie rod forward offset spacer add 35mm.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41895124500582,"sku":"SCR PSM ITRS","price":185.04,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54875_PriceBreak_41666.jpg?v=1759975996"},{"product_id":"psm-max-extended-spherical-bearing-crmo-inner-tie-rods-for-s14-1","title":"PSM MAX Extended Spherical Bearing CrMo inner tie rods for S14","description":"\u003cp\u003eScarles is the home of Parts shop max in NZ and Australia Check out the full range on their website\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" data-mce-href=\"https:\/\/store.partsshopmax.com\/\" href=\"https:\/\/store.partsshopmax.com\/\" rel=\"noreferrer noopener\" target=\"_blank\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Inner tie rods\u003c\/p\u003e\u003cp\u003eWhen running extended control arms, you need extended tie rods. These 298mm long tie rods are 27mm longer than OEM S14 inner tie rods. Good option for Z33 with extended control arms. Fits 1992-1993 FD RX7 with exteded control arms. This set is included in our FRS angle kit, but sold separately here. Great upgrade for S13 if you pair with S14 outer tie rods\u003cbr\u003e~Strong CrMo construction with pillowball inner joints\u003cbr\u003e~ 7mm built in rack spacers give more rack travel and noticable increase in steering angle\u003cbr\u003e~ 7mm longer m16p1.0 rack threads guarantee proper thread engagement into the rack\u003cbr\u003e~ 20mm longer threads on the tie rod end\u003cbr\u003e~ Sold in pairs\u003cbr\u003e~ We offer 3 inner tie rod lengths \u0026amp; the chart below lists all of the combinations. ~Note**Has less bearing travel than OEM tie rod(18 degrees vs. 28 center to max)due to double the shaft size for strength, so this should be combined with coilover suspension only. All lengths are in millimeters from end of rack to end of tie rod thread, or when our inner and outer are combined\u003cbr\u003e~ rack to OTR joint center. When using RSPCR rack to inner tie rod forward offset spacer add 35mm.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41895135182950,"sku":"SCR PSM ITR","price":195.93,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54220_PriceBreak_41011.jpg?v=1759975998"},{"product_id":"psm-z33-rack-forward-crossmember-center-section-1","title":"PSM Z33 rack-forward crossmember Center Section","description":"\u003cp\u003eParts Shop Max Z33 rack-forward crossmember Center Section\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Steering rack Relocation kit\u003c\/p\u003e\u003cp\u003e*Steering Shaft Extension (part number SSE) is sold separately*\u003cbr\u003eOn drift cars with a rear mounted steering rack, like the Z33, it is important to position the steering rack forward when you drastically increase your steering angle.\u003cbr\u003eThis will help you acheieve more useable steering angle with smoother steering feel and less binding\/overcentering.\u003cbr\u003eSet includes Weld on base plate, solid aluminum rack bushings, hardware, and high surface area low profile tubular rack mounts.\u003cbr\u003eRack mounts are strong due to precise fitment to rack.\u003cbr\u003eT-bolt clamps secure the mounts while giving good engine clearance.\u003cbr\u003eThis weld-in kit will Move your steering rack forward 36mm.\u003cbr\u003eThis will allow you to delete the inner tie rod offset spacers commonly provided with angle kits.\u003cbr\u003eOffset spacers are an easy solution for preventing overcentering.\u003cbr\u003eBut they are a weak link in the steering system and add stress to the steering rack. Relocating the entire rack is the better solution.\u003cbr\u003eRemoving the rack offset spacers requires an additional 35mm of tie rod length (uncut S14 extended inner tie rods recommeded if using MAX Super Angle Kit. Requires steering input spline extension on the column intermediate shaft or custom steering column.\u003cbr\u003eCars with speed sensitive steering solenoid will require our solenoid delete sold separately.\u003cbr\u003eContact us if you are a shop that intends to do this regularly since it will speed your process to buy a crossmember cut marking jig from us.\u003cbr\u003e*Professional welding and install recommended.\u003cbr\u003eIf center plate is welded in crooked, rack will be crooked.\u003cbr\u003eIf welder overheats the plate during install, the plate can warp.\u003cbr\u003eRecommended to weld in small increments, not from end to end.\u003cbr\u003eIf you cut some of the extra threads off the T-colt clamp it could make your life easier when you fasten them after the rack is already in the car.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41895178895462,"sku":"SCR PSM Z33CS","price":402.74,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/55283_PriceBreak_42074.jpg?v=1759976001"},{"product_id":"psm-extra-long-spherical-bearing-crmo-inner-tie-rods-for-s14-1","title":"PSM EXTRA LONG Spherical Bearing CrMo inner tie rods for S14","description":"\u003cp\u003eParts Shop Max EXTRA LONG Spherical Bearing CrMo inner tie rods for S14\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of InnerTie rods\u003c\/p\u003e\u003cp\u003e~ EXTRA long inner tie rod for extremely wide lower control arms.\u003cbr\u003eUsefull when our classic extended inners are still not long enough to reach the knuckles.\u003cbr\u003eApprox 3\" longer than a stock S14 tie rod.  \u003cbr\u003e~ CrMo construction and pillowball inner joint for great strength\u003cbr\u003e~ 7mm built in rack spacer gives more rack travel and noticeable increase in steering angle when threaded directly into the steering rack\u003cbr\u003e~ 7mm longer m16p1.0 rack threads ensure proper thread engagement into the rack ~ We offer 3 inner tie rod lengths.  \u003cbr\u003e~Note**Has less bearing travel than OEM tie rod(18 degrees vs. 28 center to max) due to double the shaft size for strength, so combine with coilover suspension only. ~ rack to OTR joint center. When using RSPCR rack to inner tie rod forward offset spacer add 35mm.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41897151856742,"sku":"SCR PSM ITRL","price":217.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54874_PriceBreak_41665.jpg?v=1759976118"},{"product_id":"psm-limitbreak-outer-tie-rods-with-m14-bolt-1","title":"PSM LimitBreak Outer Tie Rods with m14 bolt","description":"\u003cp\u003eScarles is the home of Parts shop max in NZ and Australia Check out the full range on their website\u003cspan data-mce-fragment=\"1\"\u003e \u003c\/span\u003e\u003ca data-mce-fragment=\"1\" data-mce-href=\"https:\/\/store.partsshopmax.com\/\" href=\"https:\/\/store.partsshopmax.com\/\" rel=\"noreferrer noopener\" target=\"_blank\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of outer tie rods\u003c\/p\u003e\u003cp\u003eThe Limitbreak OTR was created for use with MAX limitbreak knuckles that use ackerman adjusters, which utilize a straight through M14 bolt connection. Fits S-chassis, Corvette and FD RX7 utilizing our forged knuckles along with extended control arms. Fits the GT86 when using MAX super angle knuckles with OEM arms. ~CNC aluminum threaded sleeve\u003cbr\u003e~High Misalignment spherical bearings\u003cbr\u003e~ Grade 12.9 M14 bolts with 5mm bump steer adj. spacers\u003cbr\u003e**Not for OEM tapered knuckle receivers. Tapered OTR sold seperately. Check out the chart when combining LimitBreak outer tie rod (or shorter OTR) with our 3 inner tie rod lengths and rack to inner tie rod offsetters to determine proper length. All lengths are in millimeters from end of rack to end of tie rod thread, or when our inner and outer are combined\u003cbr\u003e~ rack to OTR joint center. When using RSPCR rack to inner tie rod forward offset spacer add 35mm.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41897153724518,"sku":"SCR PSM OTRLB","price":283.01,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54389_PriceBreak_41180.jpg?v=1759976120"},{"product_id":"psm-outer-tie-rods-with-m14-bolt-oem-knuckle-1","title":"PSM S14 Pro Outer Tie Rods with OEM style Taper","description":"\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of outer tie rods\u003c\/p\u003e\u003cp\u003eThe tapered Pro OTR was created for use with S13, S14 and S15 knuckles that still use a tapered hole, such as modified OEM knuckles or our Standard forged super angle knuckles.\u003cbr\u003eThese outer tie rods are similar in length to the stock tie rods.\u003cbr\u003e~Replaceable PTFE lined high misalignment outer heim joints.\u003cbr\u003e~Replaceable Chromoly taper rods for S-chassis knuckles\u003cbr\u003e~CNC aluminum sleeves with M14x1.50 threads for compatibility with common Nissan inner tie rods (S13's must upgrade to S14 inner tie rods)\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41897156542566,"sku":"SCR PSM OTRT","price":261.24,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54688_PriceBreak_41479.jpg?v=1759976122"},{"product_id":"psm-outer-tie-rods-with-m14-bolt-1","title":"PSM Outer Tie Rods with m14 bolt","description":"\u003cp\u003eParts Shop Max Outer Tie Rods with m14 bolt\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of outer tie rods\u003c\/p\u003e\u003cp\u003eThe PRO OTR was created for use with MAX limitbreak knuckles that use ackerman adjusters, which utilize a straight through M14 bolt connection.\u003cbr\u003eThese are shorter length than our Limit Break version outer tie rods.\u003cbr\u003eSimilar in length to OEM S14 outer tie rods.\u003cbr\u003eThese are replacements for the outer tie rods included in the Z33 and GT86 angle kits.\u003cbr\u003eCan be used when pairing our Corvette and S-chassis knuckles with stock length control arms.\u003cbr\u003e~CNC aluminum threaded sleeve\u003cbr\u003e~High Misalignment spherical bearings\u003cbr\u003e~ Grade 12.9 M14 bolts with 5mm bump steer adj. spacers\u003cbr\u003e**Not for OEM tapered knuckle receivers. Tapered tie rods sold separately.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41897156739174,"sku":"SCR PSM OTR","price":228.58,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54793_PriceBreak_41584.jpg?v=1759976124"},{"product_id":"psm-s14-rack-forward-crossmember-center-section-1","title":"PSM S14 rack forward crossmember Center Section (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x steering rack relocation kit\u003c\/p\u003e\u003cp\u003e*Steering Shaft Extension, Part number SSE, is sold separately\u003cbr\u003e*Now with triple clamps \u0026amp; compatibility on both RHD \u0026amp; LHD racks!\u003cbr\u003eDriftCave collaboration FormulaDrift legal rack forward center section \u0026amp; crossmember modification service is available now, after abuse testing was completed on Matt Field’s FDs14.\u003cbr\u003eThis has 3 steps of forward adjustment to increase steering leverage \u0026amp; decrease Ackerman without offsetting the ITR, up to 40mm in front of the OEM position!\u003cbr\u003eThe high surface area T bolt clamps are very thin to provide #LSx V8 swap oil pan clearance, even on s13 while preventing the rack from twisting or being crushed from clamping force.\u003cbr\u003eThis will allow the rack to be swapped during a five minute time out \u0026amp; the clamp brackets themselves serve as a replaceable crash energy absorption point, saving the increasingly rare rack and crossmember from damage by minor incident.\u003cbr\u003eThe rack height can also be dropped 10mm to clear #1JZ \u0026amp; #2JZ swaps.\u003cbr\u003eThe center section is available from Parts Shop MAX as a DIY kit only so you’ll need a fab shop to brace the SF frame mounting points, cut the middle out \u0026amp; align our parts with holes in the bottom plane of the SF, and weld in the bar \u0026amp; plates.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41897162047590,"sku":"SCR PSM S14CS","price":620.44,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/55278_PriceBreak_42069.jpg?v=1759976128"},{"product_id":"psm-e36-e36m3-extended-inner-tie-rod-order-in","title":"PSM E36 \u0026 E36M3 extended Inner Tie Rods for our front lower arms (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Tie rods\u003c\/p\u003e\u003cp\u003ePair of Extended inner tie rods for use with our fixed length billet style FLCA and our 125mm turnbuckle length outer tie rods.\u003cbr\u003e294mm length measured from the E36 rack shaft to the end of the M14 thread, excludes male thread length that goes into the rack.\u003cbr\u003eCrMo material and spherical bearing joints.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41900808339558,"sku":"SCR PSM E36ITR","price":217.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_45.jpg?v=1759976218"},{"product_id":"psm-e46-e46m3-extended-inner-tie-rod-order-in","title":"PSM E46 \u0026 E46M3 extended Inner Tie Rods for our front lower arms (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Tie rods\u003c\/p\u003e\u003cp\u003ePair of extended inner tie rod for use with our fixed length billet style FLCA and our 94mm turnbuckle length outer tie rods.\u003cbr\u003e350mm length measured from the E46 rack shaft to the end of the M14 thread, excludes male thread length that goes into the rack.\u003cbr\u003eCrMo material and spherical bearing joints.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41900875710566,"sku":"SCR PSM E46ITR","price":217.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_46.jpg?v=1759976221"},{"product_id":"psm-e36-e36m3-outer-tie-rod-with-taper-order-in","title":"E36 \u0026 E36M3 Outer Tie Rods with Taper for OEM knuckles (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Outer Tie rods\u003c\/p\u003e\u003cp\u003ePair of outer tie rods for E36. Adjustable from 160mm to 175mm long measured from end to center of joint.\u003cbr\u003eM14p1.5 inner tie rod connection \u0026amp; M16p2.0 rod end.\u003cbr\u003eRemovable chromoly taper pins with bumpsteer adjustable washers \u0026amp; hardware fit into OEM knuckles.\u003cbr\u003ePin can be removed and swapped to an m14 bolt to connect to our ackerman adjustable super angle knuckles.\u003cbr\u003e** These tie rods are not a direct replacement for stock because they are shorter than stock.\u003cbr\u003eCombine these outer tie rods with our inner tie rods, sold separately, to get the perfect inner\/outer length combination for our new billet style front lower arms or other extended arms.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41901525106790,"sku":"SCR PSM E36OTRT","price":315.66,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_47.jpg?v=1759976223"},{"product_id":"psm-e46-e46m3-outer-tie-rod-with-taper-order-in","title":"PSM E46 \u0026 E46M3 Outer Tie Rods with Taper for OEM knuckles (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Outer Tie rods\u003c\/p\u003e\u003cp\u003ePair of outer tie rods for E46. Adjustable from 130mm to 145mm long measured from end to center of joint.\u003cbr\u003eM14p1.5 inner tie rod connection \u0026amp; M16p2.0 rod end. Removable chromoly taper pins with bumpsteer adjustable washers \u0026amp; hardware fit into OEM knuckles.\u003cbr\u003ePin can be removed and swapped to an m14 bolt to connect to our ackerman adjustable super angle knuckles.\u003cbr\u003e** These tie rods are not a direct replacement for stock because they are shorter than stock.\u003cbr\u003eCombine these outer tie rods with our inner tie rods, sold separately, to get the perfect inner\/outer length combination for our new billet style front lower arms or other extended arms.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41901820117094,"sku":"SCR PSM E46OTRT","price":293.89,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_49.jpg?v=1759976224"},{"product_id":"psm-rack-forward-crossmember-center-section-for-frs-brz-gt86-order-in","title":"PSM Rack Forward Crossmember Center Section for FRS BRZ GT86 (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Steering rack relocation kit\u003c\/p\u003e\u003cp\u003eRelocate your stock electric steering rack forward 33mm with this crossmember mod, which is very similar to the 36mm seen on our angle kit’s rack to inner tie rod forward offsetter.\u003cbr\u003eHowever leverage on the rack is reduced \u0026amp; it’s life expectancy is increased making this mod worth all the effort.\u003cbr\u003eUse FDITR494UP tie rods to make up for the length lost when removing offsetters. After the CM Center Section is in, bumpsteer is less progressive \u0026amp; can be eliminated by adjusting washer stack height between outer tie rod \u0026amp; knuckle.\u003cbr\u003eWe’ve confirmed clearance with Both LS Swap \u0026amp; the stock exhaust \/ oil pans despite the giant reinforcement plate on the front side.\u003cbr\u003eThe 1\/4” of stock pan clearance may not be enough one day on blown stock motor and subframe mounts but you should have those things sorted out before this more advanced mod.\u003cbr\u003eThis ZNC6CS plate will not need the steering shaft extension as seen on other cars because it has a relatively vertical shaft so this rack forward position is more of an angle change on the U joint than telescoping on the shaft so these OEM parts can accommodate both movements freely.\u003cbr\u003eV8 swap header tube(s) will need customised for shaft clearance. Our solid bushings require a little grinding on the OEM lock ring to match the shape in the rack casting.\u003cbr\u003eInstall the centered steering shaft on the centered rack before securing the 2 bolts through our solid rack bushings to the crossmember plate.\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41917698539622,"sku":"SCR PSM ZNC6CS","price":326.55,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_67.jpg?v=1759976354"},{"product_id":"psm-inner-tie-rods-for-94-fd-rx7-and-toyota-gt86-frs-1","title":"PSM Inner Tie rods for 94+ FD RX7 and Toyota GT86\/FRS (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of inner tie rods\u003c\/p\u003e\u003cp\u003eWhen equipped with our extended front lower arms and our forged knuckle, you need longer tie rods.\u003cbr\u003eThese 298mm long chromoly tie rods fit FD3S RX7 manufactured 04\/1994 and up. They also fit the FRS\/BRZ\/GT86\/GR86 steering rack.\u003cbr\u003e~Strong CrMo construction with spherical bearing inner joints.\u003cbr\u003e~m16p1.5 rack threads\u003cbr\u003e~ 7mm built in rack spacers give more rack travel and noticeable increase in steering angle\u003cbr\u003e~ 7mm longer rack threads guarantee proper thread engagement into the rack\u003cbr\u003e~ 20mm longer threads on the tie rod end\u003cbr\u003e~ 298 millimeters from end of rack to end of tie rod thread designed for use with extended track width only.\u003cbr\u003e**Does not attach to the offset rack spacers in our FRS angle kit. Only use these if you are not using offset spacers, for example, if you have a relocated rack.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41917812998246,"sku":"SCR PSM FDITR494UP","price":283.01,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/55754_PriceBreak_42545.jpg?v=1759976360"},{"product_id":"psm-frs-brz-gt86-steering-rack-solid-bushing-order-in","title":"PSM FRS BRZ GT86 Steering Rack Solid Bushing (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Set of steering rack bushes\u003c\/p\u003e\u003cp\u003eSolid bushings replace OEM parts for increased steering response and they outperform \/ outlast urethane often at a lower cost too.\u003cbr\u003eThis CNC machined, CAD modeled 4pc anodised aluminum set fits perfectly after removing OEM bushings\/sleeves due to 3d laser scanning and probing of the OEM subframe and diff.\u003cbr\u003eThese come with the rack-forward crossmember center section, sold separately, but they can also be installed by themselves without any other parts.\u003cbr\u003eNo press is required. DIY install can be done with a mallet at room temp or you may freeze them for 30 minutes ahead of time to make the process very easy.\u003cbr\u003eGrinding is required on the OEM lock ring.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41918187765862,"sku":"SCR PSM ZNC6SRSB","price":130.62,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_69.jpg?v=1759976383"},{"product_id":"psm-super-angle-knuckle-fc-rx7-order-in","title":"PSM Super Angle Knuckle, Forged steel with Gold Zinc coating, For FC RX7","description":"\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles\u003c\/p\u003e\u003cp\u003ePair of Super Angle Knuckles, Forged steel and CNC machined with Gold Zinc coating, For FC3S RX7\u003cbr\u003e- One piece forged design. No need to send in knuckles for modification.\u003cbr\u003e- 45mm roll center and bump steer correction built into knuckles. Flattens LCA and tie rod angles.\u003cbr\u003e- Increased steering angle, altered ackerman and quicker steering due to modified tie rod pickup points.\u003cbr\u003e- For use with OEM Mazda hubs, brakes, tie rods and LCA ball joints.\u003cbr\u003e- Use with our FLCA and tie rod spacers for best results.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41919896584294,"sku":"SCR PSM FCSAKN","price":870.8,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/54202_PriceBreak_40993.jpg?v=1759976412"},{"product_id":"psm-c5-c6-super-angle-knuckles-w-ackerman-adjust-order-in","title":"PSM C5 \u0026 C6 Super angle knuckles w\/ Ackerman adjust (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles with ackerman washers\u003c\/p\u003e\u003cp\u003e~ Pair of Super Angle Knuckles for C5\/C6 Corvette\u003cbr\u003e~Forged aluminum, CNC machined\u003cbr\u003e~Gold Anodizing\u003cbr\u003e~Up to 70 degrees max steering angle\u003cbr\u003e~ Double sheer tie rod pickup for greater strength compared to OEM\u003cbr\u003e~Replaceable Spherical Bearing Joint with Chromoly taper-pin\u003cbr\u003e~Ackerman adjuster plates\u003cbr\u003e~Bump steer adjustment\u003cbr\u003e~Compatible with stock control arms for moderate increase in angle.\u003cbr\u003eOr MAX Limit Break control arms for the most angle and adjustability.\u003cbr\u003e*** Requires our clevis based complete tie rod if running our upper \u0026amp; lower arms with extended track width.\u003cbr\u003eOr use PRO outer tie rods (part # OTR) if running with OEM arms. Tie rods sold separately.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41940937179238,"sku":"SCR PSM C6SAKN","price":1523.89,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_83.jpg?v=1759976505"},{"product_id":"psm-c5-c6-super-angle-knuckles-w-ackerman-adjust-for-z33-track-calipers-order-in","title":"PSM C5 \u0026 C6 Super angle knuckles w\/ Ackerman adjust for Z33 track calipers (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles with ackerman washers\u003c\/p\u003e\u003cp\u003e~Pair of Super Angle Knuckles for C5\/C6 Corvette\u003cbr\u003e~Convert your Corvette to Z33 350Z TRACK calipers and C6Z06 rotors using this knuckle set\u003cbr\u003e~Forged aluminum, CNC machined\u003cbr\u003e~Gold Anodizing\u003cbr\u003e~Up to 70 degrees max steering angle\u003cbr\u003e~ Double sheer tie rod pickup for greater strength compared to OEM\u003cbr\u003e~Replaceable Spherical Bearing Joint with CrMo taper-pin\u003cbr\u003e~Ackerman adjuster plates\u003cbr\u003e~Bump steer adjustment\u003cbr\u003e~Compatible with stock control arms for moderate increase in angle. Or MAX Limit Break control arms for the most angle and adjustability.\u003cbr\u003e*** Requires our clevis based complete tie rod if running our upper \u0026amp; lower arms with extended track width. Or use Pro outer tie rods (part # OTR) if running with OEM arms.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41940974993510,"sku":"SCR PSM C6SAKNZ","price":1523.89,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_85.jpg?v=1759976508"},{"product_id":"psm-c7-super-angle-knuckles-with-ackerman-adjuster-order-in","title":"PSM C7 Super Angle Knuckles with Ackerman adjuster (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles with ackerman washers\u003c\/p\u003e\u003cp\u003e~ Pair of Super Angle Knuckles for C7 Corvette\u003cbr\u003e~Forged aluminum, CNC machined\u003cbr\u003e~Gold Anodizing\u003cbr\u003e~Up to 70 degrees max steering angle\u003cbr\u003e~ Double sheer tie rod pickup for greater strength compared to OEM\u003cbr\u003e~Replaceable Spherical Bearing Joint with CrMo taper-pin\u003cbr\u003e~Ackerman adjuster plates\u003cbr\u003e~Bump steer adjustment\u003cbr\u003e~Compatible with stock control arms for moderate increase in angle. Or MAX Limit Break control arms for the most angle and adjustability.\u003cbr\u003e*** Requires our clevis based complete tie rod (part # C7TIERT) if running our upper \u0026amp; lower arms with extended track width. Or use Limit Break outer tie rods (part # OTRLB) if running with OEM arms.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41941091876966,"sku":"SCR PSM C7SAKN","price":1523.89,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_86.jpg?v=1759976510"},{"product_id":"psm-c5-c6-oem-style-knuckles-for-front-or-rear-order-in","title":"PSM C5 \u0026 C6 OEM style knuckles for front or rear (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles\u003c\/p\u003e\u003cp\u003ePair of OEM replacement front OR rear knuckles made in forged aluminum with gold anodizing.\u003cbr\u003eReplaceable PTFE lined spherical bearing joint with lock ring and chromoloy taper pin. Sold as a set of left \u0026amp; right only.\u003cbr\u003eGM discontinued the OEM knuckles. So these are perfect for people looking to repair their stock cars.\u003cbr\u003eAlso great for custom chassis using corvette based suspension conversions.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41941099610214,"sku":"SCR PSM C6KN","price":1306.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_87_ece4ba26-1f3c-49a8-aa67-2bb78bb3f26c.jpg?v=1759976512"},{"product_id":"psm-c5-c6-steering-rack-solid-mount-order-in","title":"PSM C5 \u0026 C6 steering rack solid mount (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Steering rack solid mount\u003c\/p\u003e\u003cp\u003eBillet gold anodized 6061 mount replaces the single OEM bushing thats prone to failure especially with the additional forces seen at double the stock steering angle. The one piece design is simple, reliable, light, strong and affordable.\u003cbr\u003eHowever, it does require some preparation to the rack by cutting off the OEM mount's steel band from the rack tube \u0026amp; painting that smoothed tube surface to prevent rust, as seen in the gallery photos along with an example of one of Matt Field's many racks that have a ripped off OEM right side mount.\u003cbr\u003eThe left side of the rack is already solid mounted from the factory. This is a great part to take care of at the same time you install our amazing CrMo clevis mounted tie rods because those require cutting off the OEM casting's cup that retains the original left side tie rod boot.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41950650105958,"sku":"SCR PSM C6SRSM","price":217.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_97.jpg?v=1759976530"},{"product_id":"psm-c5-c6-limitbreak-clevis-tie-rod-order-in","title":"PSM C5 \u0026 C6 LimitBreak Clevis TIE Rod (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Tie rods\u003c\/p\u003e\u003cp\u003ePair of hardened chromoly adjustable clevis style front tie rods for C5 and C6 Corvette equipped with our forged super angle knuckles.\u003cbr\u003ePTFE lined, low torque, high misalignment M16 spherical rod ends on inner and outer joints. This complete tie rod has way more misalignment angle than conventional tie rods in order to allow 70 degrees of steering angle without binding the joints or flexing the rack shaft near full travel.\u003cbr\u003eThe length is suitable only for use with extended control arms. Bolts right into the Ackerman adjustable hardware on the MAX knuckle.\u003cbr\u003eOption for OEM knuckle taper is in shopping cart. Minimum length setting is 390mm from rack shaft to outer joint center.\u003cbr\u003e*** The cup end of the steering rack casting needs some grinding to clear the M14 bolt going through the clevis. If you do not grind the end of the rack, you will not get full steering angle\u003cbr\u003e*** While you are in there cutting the left side steering rack cup its also a good time to cut off the steel band that retains the right side OEM bushing mount thats prone to ripping off.\u003cbr\u003ePurchase our billet solid rack mount sold separately on this site as part of your complete \u0026amp; more reliable steering angle improvements.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41952087212134,"sku":"SCR PSM C6TIERLB","price":620.44,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/4183275de5327636c2efb2ecac5ae634_20_98.jpg?v=1759976533"},{"product_id":"psm-c7-limitbreak-clevis-tie-rods-w-taper-pin-order-in","title":"PSM C7 Limitbreak Clevis TIE Rods w\/ Taper pin (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Tie rods\u003c\/p\u003e\u003cp\u003ePair of hardened chromoly adjustable clevis style tie rods for C7 Corvette. PTFE lined, low torque, high misalignment M16 spherical rod ends on inner and outer joints.\u003cbr\u003eThis complete tie rod has way more misalignment angle than conventional tie rods in order to allow 70 degrees of steering angle without binding the joints or flexing the rack shaft near full travel.\u003cbr\u003eThe length is suitable only for use with extended control arms. Bolts right into the Ackerman adjustable hardware on the MAX knuckle.\u003cbr\u003eMinimum length setting is 390mm from rack shaft to outer joint center. *** The cup end of the steering rack casting needs cutting to clear the M14 bolt going through the clevis. If you do not grind the end of the rack, you will not get full steering angle.***\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41952092094566,"sku":"SCR PSM C7TIERT","price":685.75,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/5ecaa1a72be897236bde77e36cb52b4a_20_13.jpg?v=1759976535"},{"product_id":"psm-is300-jzx-super-angle-knuckle-brackets-outer-tie-rods","title":"PSM IS300 \u0026 JZX Super Angle Knuckle Brackets \u0026 Outer Tie Rods","description":"\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckle brackets with outer tie rods\u003c\/p\u003e\u003cp\u003e**IMPORTANT INSTALL NOTES ~ Take 4 minutes to read all 9 points in the red PDF link so your car is never damaged by ignoring this info.\u003cbr\u003e** CNC Billet ackerman adjustable super angle knuckle brackets for XE10 Lexus IS300\/Altezza and JZX90\/100.\u003cbr\u003eReplaces the OEM 2 bolt lower ball joint and outer tie rods. Quickens steering for more steering angle.\u003cbr\u003e40mm roll center correction. Low torque spherical bearing with chromoly ball joint taper.\u003cbr\u003eYou can get 70 degrees of angle when all of our front end parts are used together with this set. However, it's possible to install separately without our complete set although you won't get all the angle, clearance \u0026amp; optimized alignment we've engineered into this 3D laser scanned CAD modeled set.\u003cbr\u003eThe full angle kit is optimized for use with 17x9+15 wheels with 235\/40 tire with a 50mm+ wide body kit.\u003cbr\u003eThe lower arm will be dropped 40mm which will lower the ride height. So be sure you can lengthen your coilovers to compensate.\u003cbr\u003eGS300 note: this part requires the 88mm on center two bolt spacing on the bottom of the IS\u0026amp;JZX, so although the 2GS knuckle looks similar, this just won't bolt on to GS300's 95mm two bolt spacing.\u003cbr\u003eIt may be possible to use this part with an IS300 front knuckle, hub, and brakes.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41957533745254,"sku":"SCR PSM SXE10SAKB","price":1306.19,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/56914_PriceBreak_43702.jpg?v=1759976607"},{"product_id":"psm-is300-rack-forward-crossmember-center-section-1","title":"PSM IS300 Rack Forward Crossmember Center Section","description":"\u003cp\u003eParts Shop Max IS300 Rack Forward Crossmember Center Section\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Forward crossmember centre section kit\u003c\/p\u003e\u003cp\u003e*Steering Shaft Extension, part number SSE, is sold separately* Weld in this laser cut and CNC press brake bent steel crossmember center section to move the steering rack forward 36mm for use with modified steering knuckles.\u003cbr\u003eReduces overcentering and binding at high steering angle. Includes Aluminum and delrin solid rack mounts to allow precise and easy control over big steering angles. This kit lengthens the life of the steering rack compared to using offset rack spacers.\u003cbr\u003eWe recommend using our machined eccentric bolt lock outs and slim hardware set (sold separately) so your tie rods clear the LCA mounting bolt when the rack is moved forward.\u003cbr\u003eFor planning the scope of the fabrication work, look at the instagram media for crossmember marking, cutting, welding and ideal finished assembly images and videos by searching the hashtag #SXE10CS\u003cbr\u003e**Fits Left hand drive vehicles only. You may need to extend your steering column when relocating the rack.\u003cbr\u003eWe sell steering column extenders separately, part number SSE.\u003cbr\u003ewatch the instagram video on marking by searching the hashtag on Instagram #SXE10CSmarkingJig\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41957566611558,"sku":"SCR PSM SXE10CS","price":544.25,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/56917_PriceBreak_43705.jpg?v=1759976618"},{"product_id":"psm-is300-extended-inner-tie-rods-1","title":"PSM IS300 Extended Inner Tie Rods (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of inner tie rods\u003c\/p\u003e\u003cp\u003eSold in pairs\u003cbr\u003e~ Chromoly rod\u003cbr\u003e~ spherical bearing joint\u003cbr\u003e~ 5.5mm built in spacer for extra rack throw\u003cbr\u003e~ M14p1.50 rack threads\u003cbr\u003e~ 296mm from rack shaft to the end of the M14p1.50 75mm long thread.\u003cbr\u003e**This extended length tie rod is for use with our crossmember center section (no rack to ITR offsetter), our extended FLCA, LimitBreak Outer tie rod end \/ super angle knuckle bracket, or other applications that can handle the length of this ITR. Its OK to cut the 75mm length threads that go into the outer tie rod to achieve toe alignment on shorter track width cars or when used with ITR offsetters.\u003cbr\u003eJust measure for your unique needs if you dont plan to have our complete front end set (all sold separately).\u003cbr\u003e***We limited the OEM ITR travel (18 degrees vs. 28 center to max) to double the shaft size for strength, so this should be combined with coilover suspension only.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":41957606948966,"sku":"SCR PSM SXE10ITR","price":217.7,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/56918_PriceBreak_43706.jpg?v=1759976621"},{"product_id":"psm-is300-steering-rack-solid-bushing-set-for-unmodified-crossmembers-order-in","title":"PSM IS300 Steering Rack Solid Bushing set for unmodified crossmembers (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Bushing set\u003c\/p\u003e\u003cp\u003eAnodized billet aluminum and Delrin bushing set for the OEM rack and crossmember including hardware.\u003cbr\u003eIncreases steering response over OEM bushings and also outlasts urethane. Perfect for use with steering angle modifications and inner toe rod forward offsetters that place additional stress on the original bushings.\u003cbr\u003eRemove the OEM bushings and clean the rack’s machined bushing contact surfaces.\u003cbr\u003eOEM parts may have a tighter tolerance than assistance from a dead blow hammer provides at room temp, so considering the huge range of tolerances seen in OEM parts.\u003cbr\u003eIf the bushings have any trouble going in, just try freezing the bushing for 30 minutes before install. Their slip fit does not require a press.\u003cbr\u003e**NOTE, the rack forward crossmember center section comes with these bushings. That set uses a different hardware length and does not require the flat plate like this set designed for an unmodified crossmember.\u003cbr\u003eIf for some reason you own this and later move onto the center section later, you would remove these parts and sell them or make special arrangements with us to supply the CS less bushings.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":42018502344806,"sku":"SCR PSM SXE10SRSB","price":206.81,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/SXE10SRSB.jpg?v=1759976660"},{"product_id":"psm-genesis-coupe-super-angle-kit-order-in","title":"PSM Genesis Coupe Super Angle Kit (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Super angle kit\u003c\/p\u003e\u003cp\u003eComplete front end set including:\u003cbr\u003e~ Front Lower Control arms with tension rod , Camber and Track Width adjustable, DOM Japanese tubing, Extra clearance for tires at high angle. Adjustable Forged rod ends with forged clamping rod end receiver, clamping jam nut, teflon lined spherical bearing, high misalignment spacers.\u003cbr\u003e~ Converts front suspension to single lower ball joint pivot for improved KPI for drifting applications.\u003cbr\u003e~ Tension rod, caster adjustable with proprietary parts listed above\u003cbr\u003e~ Outer Tie rod end, CrMo Teflon lined with aluminum turnbuckle, connects to OEM inner tie rod.\u003cbr\u003e*** Roll center adjusted, Single steering pivot super angle knuckle bracket, double shear mounting, requires cutting EXACTLY as seen in the gallery to provide a solid steering bump stop surface \u0026amp; a flat contact area for the bracket.\u003cbr\u003e~ Double heim joint adjustable sway bar link\u003cbr\u003e~ OEM sway bar adapter bracket (sway bar no longer attaches to coil over)\u003cbr\u003e~ Adjustable steering angle bump stop\u003cbr\u003e~ All high grade hardware needed for install is included\u003cbr\u003e~ Gold Zinc Coating (iridescent)\u003cbr\u003e~ Extra gussets and bracing on knuckle adapters and FLCA for added strength. **Designed for drifting. ABS and traction control must be disabled. Reduced ackerman will cause tire scrub on sharp low speed turns.\u003cbr\u003eTrack width will be increased. These are standard effects of knuckles modified for drift use.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":42038387802214,"sku":"SCR PSM GSAK","price":2176.99,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/GSAK.jpg?v=1759976741"},{"product_id":"psm-gs300-jzs16x-steering-rack-solid-bushing-set-order-in","title":"PSM GS300 JZS16x Steering Rack Solid Bushing set (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Set of steering rack bushes\u003c\/p\u003e\u003cp\u003eAnodized billet aluminum and Delrin bushing set for the OEM rack including hardware.\u003cbr\u003eIncreases steering response over OEM bushings and also outlasts urethane. Perfect for use with steering angle modifications that place additional stress on the original bushings.\u003cbr\u003eRemove the OEM bushings and clean the rack’s machined bushing contact surfaces.\u003cbr\u003eOEM parts may have a tighter tolerance than assistance from a dead blow hammer provides at room temp, so considering the huge range of tolerances seen in OEM parts.\u003cbr\u003eIf the bushings have any trouble going in, just try freezing the bushing for 30 minutes before install.\u003cbr\u003eTheir slip fit does not require a press.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":42065511776358,"sku":"SCR PSM 2GSSRSB","price":341.79,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/2GSSRSB.jpg?v=1759976821"},{"product_id":"psm-e36-style-conversion-knuckles-for-e46-super-steering-angle-order-in","title":"PSM E36 Style Conversion Knuckles for E46 - Super Steering Angle (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of knuckles\u003c\/p\u003e\u003cp\u003eConvert your BMW E46 (323, 325i, non-M cars) to the E36 style front suspension with this pair of forged\/CNC machined super angle knuckles to improve steering angle, steering feel and adjustability.\u003cbr\u003eConverting the E46 to E36 style front suspension has been popular in drifting for a while. But we found that there are geometry issues when simply throwing E36 knuckles onto your E46, due to the difference in rack position and chassis pickup points.\u003cbr\u003eSo we made these custom knuckles specifically for use on the E46 chassis. This gives you the benefits of the E36 conversion while also maintaining proper steering ratio, proper ackerman, and allows you to reuse your E46 hubs and brakes, reducing overall project cost.\u003cbr\u003eThese knuckles start out as a strong forged steel blank and are then CNC machined for excellent fit and finish and perfect symmetry. These knuckles are a part of our full angle kit (FLCA, extended tie rods, top camber plates, sold separately) allowing 63 degrees of usable steering angle and optimized geometry.\u003cbr\u003eBut these knuckles are also available separately for use with OEM or modified OEM arms for a moderate increase in angle.\u003cbr\u003eThese knuckles quicken the steering ratio to allow more steering angle, and ackerman is adjustable with the included flippable stainless lockouts. Included angle\/KPI are altered to improve steering feel at high angle without having to stack spacers between the coilover bracket and knuckle.\u003cbr\u003e** Compatible with E46 non-M hubs and brakes. Requires our outer tie rods with M14 bolts to connect to ackerman adjuster lockouts.\u003cbr\u003eRequires use of longer E36 front shocks and coilover lower mounts, which are available from us or usually can be requested from your specific coilover manufacturer.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":43625433497702,"sku":"SCR PSM E46SAKN","price":1137.57,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/bd42a2f.jpg?v=1763600171"},{"product_id":"psm-e36-e46-fine-adjustment-ackerman-lockouts-for-our-forged-knuckles-order-in","title":"PSM E36 E46 Fine Adjustment Ackerman Lockouts for our forged knuckles (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Set of Ackerman Lockouts\u003c\/p\u003e\u003cp\u003eThis 8 piece precision machined stainless steel lockout set allows 4 additional steps of ackerman adjustment on our Forged super angle knuckles for E36 and E46.\u003cbr\u003eThe knuckles come equipped with 2 settings already.\u003cbr\u003eBut if you find yourself in need of extra adjustability, this set is available for purchase.\u003cbr\u003eOn the front-rack BMW, moving the tie rod pickup on the knuckle inboard, away from the brake rotors will bring you closer to parallel steering.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":43625440870502,"sku":"SCR PSM E3646FAAL","price":358.68,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/bd42a1.jpg?v=1763600978"},{"product_id":"psm-e36-e36m3-otr-with-m14-bolt-for-super-angle-knuckles-order-in","title":"PSM E36 \u0026 E36M3 OTR with M14 bolt for Super Angle Knuckles (Order in)","description":"\u003cp\u003e*Note* This product is currently order in from the Parts shop max Taiwan Factory. Roughly takes 1-2 weeks if in stock with Taiwan. You can check stock worldwide on the PSM website \u003ca href=\"https:\/\/store.partsshopmax.com\/\"\u003ehttps:\/\/store.partsshopmax.com\/\u003c\/a\u003e . If Taiwan is out of stock we can order from USA which may increase the price due to shipping costs from the states\u003c\/p\u003e\u003cp\u003eListing is for:\u003cbr\u003e1x Pair of Outer tie rods\u003c\/p\u003e\u003cp\u003ePair of outer tie rods for E36. Adjustable from 160mm to 175mm long measured from end to center of joint.\u003cbr\u003eM14p1.5 inner tie rod connection \u0026amp; M16p2.0 rod end. Includes grade 12.9 M14 bolts to connect to our ackerman adjustable super angle knuckles.\u003cbr\u003e** These tie rods are not a direct replacement for stock because they are shorter than stock and do not include tapered pins for the stock knuckle holes.\u003cbr\u003eCombine these outer tie rods with our inner tie rods, sold separately, to get the perfect inner\/outer length combination for our new billet style front lower arms or other extended arms.\u003c\/p\u003e","brand":"PSM","offers":[{"title":"Default Title","offer_id":43625511780454,"sku":"SCR PSM E36OTR","price":315.66,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/bd425.jpg?v=1763602635"}],"url":"https:\/\/racerproducts.co.nz\/collections\/steering-systems.oembed?page=3","provider":"Racer Products","version":"1.0","type":"link"}