{"title":"Tilton 600 Series Racing Pedal Assemblies","description":"\u003cp\u003eTilton 600-Series pedal assemblies are the benchmark for pedal assemblies of their type, offering great performance and value.\u003c\/p\u003e\n\u003cp\u003e600-Series pedal assemblies are the categorised by the use of a traditional spherical bearing type balance bar and flange mounted master cylinders.\u003c\/p\u003e\n\u003cp\u003e600-Series pedal assemblies are available in Firewall-mount, Floor-mount, Overhung and Underfoot configurations.\u003c\/p\u003e","products":[{"product_id":"tilton-600-series-3-pedal-floor-mount-assembly","title":"Tilton 600-Series 3-Pedal Floor Mount Assembly","description":"\u003cp\u003eTilton’s \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/600-series\/\" rel=\"noopener\" target=\"_blank\"\u003e600-Series\u003c\/a\u003e 3-pedal floor mount assembly features traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices. Pedal assemblies are available in \u003ca href=\"https:\/\/tiltonracing.com\/product\/600-series-3-pedal-floor-mount-assembly\/\" rel=\"noopener\" target=\"_blank\"\u003efloor-mount\u003c\/a\u003e, \u003ca href=\"https:\/\/tiltonracing.com\/product\/600-series-firewall-mount-aluminum-pedal-assembly\/\" rel=\"noopener\" target=\"_blank\"\u003efirewall-mount\u003c\/a\u003e and \u003ca href=\"https:\/\/tiltonracing.com\/product\/600-series-overhung-mount-aluminum-pedal-assembly\/\" rel=\"noopener\" target=\"_blank\"\u003eoverhung\u003c\/a\u003e configurations.\u003c\/p\u003e\u003ch4 dir=\"ltr\"\u003eFeatures:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eForged aluminum pedals with adjustable (vertical \u0026amp; horizontal) foot pads and anti-slip surfaces.\u003c\/li\u003e\n\u003cli\u003eAdjustable pedal ratio (5.29:1, 5.44:1, 5.61:1, 5.75:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.\u003c\/li\u003e\n\u003cli\u003eLarge diameter 7\/16”-20 balance bar provides maximum rigidity.  PTFE coated aluminum clevises for increased durability and reduced friction.\u003c\/li\u003e\n\u003cli\u003ePedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.\u003c\/li\u003e\n\u003cli\u003eAdjustable clutch pedal stop prevents clutch over-stroking.\u003c\/li\u003e\n\u003cli\u003eWeighs 5.5 lbs (does not include master cylinders)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not designed for use with ABS systems.  See \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/800-series-racing-pedal-assemblies\/\"\u003e800\/850-Series Pedal Assemblies\u003c\/a\u003e and \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/900-series\/\"\u003e900-Series Pedal Assemblies\u003c\/a\u003e\u003c\/strong\u003e\u003cstrong\u003e.\u003c\/strong\u003e”\u003c\/p\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039193190,"sku":"RCP TIL72-603","price":858.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/72-603-right.jpg?v=1770536425"},{"product_id":"tilton-600-series-2-pedal-floor-mount-assembly","title":"Tilton 600-Series 2-Pedal Floor Mount Assembly","description":"\u003cp\u003eTilton’s \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/600-series\/\" rel=\"noopener\" target=\"_blank\"\u003e600-Series\u003c\/a\u003e pedal assemblies feature traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices. Pedal assemblies are available in floor-mount, firewall-mount and overhung configurations.\u003c\/p\u003e\u003ch4 dir=\"ltr\"\u003eFeatures:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eForged aluminum pedals with adjustable (vertical \u0026amp; horizontal) foot pads and anti-slip surfaces.\u003c\/li\u003e\n\u003cli\u003eAdjustable pedal ratios (5.29:1, 5.44:1, 5.61:1, 5.75:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.\u003c\/li\u003e\n\u003cli\u003eLarge diameter 7\/16”-20 balance bar provides maximum rigidity. PTFE coated aluminum clevises for increased durability and reduced friction.\u003c\/li\u003e\n\u003cli\u003ePedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.\u003c\/li\u003e\n\u003cli\u003eAdjustable clutch pedal stop prevents clutch over-stroking.\u003c\/li\u003e\n\u003cli\u003eWeighs 4.6 lbs (does not include master cylinders)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not designed for use with ABS systems.  See\u003c\/strong\u003e \u003cstrong\u003e800\/850 and 900 Series Pedal Assembles.\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/tiltonracing.com\/wp-content\/uploads\/2013\/07\/Pedal-Assembly-600-Series-Aluminum-2pdlFloor_5316A_19.pdf\"\u003ehttps:\/\/tiltonracing.com\/wp-content\/uploads\/2013\/07\/Pedal-Assembly-600-Series-Aluminum-2pdlFloor_5316A_19.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039619174,"sku":"RCP TIL72-604","price":568.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/72-604_front_wide.jpg?v=1770536430"},{"product_id":"tilton-600-series-firewall-mount-aluminum-pedal-assembly","title":"Tilton 600 Series Firewall-Mount Aluminum Pedal Assembly","description":"\u003cp\u003eTilton’s \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/600-series\/\" rel=\"noopener\" target=\"_blank\"\u003e600-Series\u003c\/a\u003e overhung-mount aluminum pedal assembly features traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices.\u003c\/p\u003e\u003ch4 dir=\"ltr\"\u003eFeatures:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eForged aluminum pedals are engineered for high rigidity and low weight.\u003c\/li\u003e\n\u003cli\u003eAdjustable pedal ratio (5.0:1 – 6.2:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.\u003c\/li\u003e\n\u003cli\u003eFoot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences.\u003c\/li\u003e\n\u003cli\u003eLarge diameter 7\/16”-20 balance bar provides maximum rigidity.  PTFE coated aluminum clevises for increased durability and reduced friction.\u003c\/li\u003e\n\u003cli\u003ePedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.\u003c\/li\u003e\n\u003cli\u003eWeighs 4.8 lbs (does not include master cylinders)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not designed for use with ABS systems.  See 800\/850 and \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/900-series\/\"\u003e900\u003c\/a\u003e Series Pedal Assemblies\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003ca href=\"https:\/\/tiltonracing.com\/wp-content\/uploads\/2013\/07\/Pedal-Assembly-600-Series-Aluminum-Firewall_5054A_19.pdf\"\u003ehttps:\/\/tiltonracing.com\/wp-content\/uploads\/2013\/07\/Pedal-Assembly-600-Series-Aluminum-Firewall_5054A_19.pdf\u003c\/a\u003e\u003c\/p\u003e\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039651942,"sku":"RCP TIL72-607","price":578.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/72-607-1.jpg?v=1770536431"},{"product_id":"tilton-600-series-pedal-assembly-overhung","title":"Tilton 600 Series Pedal Assembly Overhung","description":"\u003cp\u003eTilton’s \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/600-series\/\" rel=\"noopener\" target=\"_blank\"\u003e600-Series\u003c\/a\u003e overhung-mount aluminum pedal assembly features traditional fixed-mount master cylinder and balance bar technology and provide excellent performance at competitive prices.\u003c\/p\u003e\u003ch4 dir=\"ltr\"\u003eFeatures:\u003c\/h4\u003e\u003cul\u003e\n\u003cli\u003eForged aluminum pedals are engineered for high rigidity and low weight.\u003c\/li\u003e\n\u003cli\u003eAdjustable pedal ratio (5.0:1 – 6.2:1) enable the brake pedal to be tuned to driver preference without having to change master cylinder bore size.\u003c\/li\u003e\n\u003cli\u003eFoot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences.\u003c\/li\u003e\n\u003cli\u003eLarge diameter 7\/16”-20 balance bar provides maximum rigidity.  PTFE coated aluminum clevises for increased durability and reduced friction.\u003c\/li\u003e\n\u003cli\u003ePedal pivots feature wave washers to reduce lateral pedal movement and oil impregnated bronze bushings decrease stiction.\u003c\/li\u003e\n\u003cli\u003eLightweight aluminum frame features guide “ramps” to reduce balance bar tipping, decreasing friction and improving brake repeatability.\u003c\/li\u003e\n\u003cli\u003eWeighs 4.8 lbs (does not include master cylinders)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not designed for use with ABS systems.  See \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/800-series-racing-pedal-assemblies\/\"\u003e800\/850-Series Pedal Assemblies\u003c\/a\u003e and \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/900-series\/\"\u003e900-Series Pedal Assemblies\u003c\/a\u003e\u003c\/strong\u003e\u003cstrong\u003e.\u003c\/strong\u003e”\u003c\/p\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039684710,"sku":"RCP TIL72-608","price":548.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/600-Series-Overhung-Mount-Aluminum-Pedal-Assembly-72-608_20_1.jpg?v=1770536436"},{"product_id":"tilton-600-series-throttle-pedal-overhung","title":"Tilton 600-Series Throttle Pedal Overhung","description":"\u003cp\u003eDesigned to complement Tilton’s current generation 600-Series aluminum \u003ca href=\"https:\/\/tiltonracing.com\/product\/600-series-overhung-mount-aluminum-pedal-assembly\/\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"600-Series Overhung-Mount Aluminum Pedal Assembly\"\u003eoverhung\u003c\/a\u003e and \u003ca href=\"https:\/\/tiltonracing.com\/product\/600-series-firewall-mount-aluminum-pedal-assembly\/\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"600-Series Firewall-Mount Aluminum Pedal Assembly\"\u003efirewall-mount\u003c\/a\u003e pedal assemblies, Tilton’s 600-Series throttle pedal is designed to mount onto the existing under-dash framework used for the brake \u0026amp; clutch pedal assembly, enabling customers to have a matched set of clutch, brake and throttle pedals. It can also be used with previous generation Tilton 600-Series pedal assemblies. The throttle pedal is designed to accept Tilton’s \u003ca href=\"https:\/\/tiltonracing.com\/product\/throttle-linkage-system\/\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"Throttle Linkage System\"\u003ethrottle linkage kits\u003c\/a\u003e (sold separately), which are available with either mechanical linkage or drive-by-wire systems. A steel extension arm kit, designed for attaching throttle cables in mid- and rear-engine cars, is also available (P\/N 72-183).\u003c\/p\u003e\u003cp\u003eThe 600-Series throttle pedal assembly features a lightweight and rigid forged aluminum pedal arm and frame, and provides a range of motion of approximately 30 degrees. As with Tilton’s current generation 600-Series Aluminum Overhung and Firewall-mount pedal assemblies, the 600-Series throttle pedal allows for a variety of pedal pad configurations, with lateral, vertical and angular adjustments available. It also features built-in throttle stops for both pedal directions. An optional grip-tape pedal pad overlay is included.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged aluminum pedals engineered for high rigidity and low weight\u003c\/li\u003e\n\u003cli\u003eCompatible with either mechanical throttle linkage or drive-by-wire sensor (\u003ca href=\"https:\/\/tiltonracing.com\/product\/throttle-linkage-system\/\" rel=\"noopener\" target=\"_blank\" title=\"Throttle Linkage System\"\u003ethrottle linkage kits sold separately\u003c\/a\u003e)\u003c\/li\u003e\n\u003cli\u003eCustomizable throttle stop positioning\u003c\/li\u003e\n\u003cli\u003eAluminum foot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences\u003c\/li\u003e\n\u003cli\u003eLow friction oil-impregnated bushing on pedal pivots\u003c\/li\u003e\n\u003cli\u003eWeighs 1.7 lbs (does not include master cylinders)\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039815782,"sku":"RCP TIL72-615","price":398.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/72-615_updated.jpg?v=1770536435"},{"product_id":"tilton-600-series-3-pedal-underfoot-assembly","title":"Tilton 600-Series 3-Pedal Underfoot Assembly","description":"\u003cp\u003eTilton’s new 600-Series 3-pedal underfoot assembly is perfect for racers who need additional space in the cockpit. Unlike traditional floor-mount pedal assemblies with forward-facing master cylinders, the underfoot pedal assembly features a rear-facing master cylinder arrangement. This enables the pedals to be mounted further forward, which allows a greater range of driver seating positions. This, along with over a hundred pedal pad configurations and an adjustable pedal ratio, makes the new underfoot pedal assembly compatible with just about any racer in any application.\u003c\/p\u003e\u003cp\u003eForged aluminum pedals and an aluminum frame give the 600-Series underfoot pedal assembly rigid and lightweight support for even the most grueling applications. Included with the assembly is a large 7\/16”-20 balance bar (\u003ca href=\"https:\/\/tiltonracing.com\/?page_id=1243\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"600-Series Balance Bar Assembly\"\u003eP\/N 72-260\u003c\/a\u003e), which minimizes flex and provides a solid pedal feel. Action on the pedals is kept smooth and consistent with low friction oil-impregnated bushings on the pedal pivots. For additional customization, the 600-Series 3-pedal underfoot assembly is also compatible with customer-supplied false floors and heel rests. The optional Tilton \u003ca href=\"https:\/\/tiltonracing.com\/?page_id=1259\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"Throttle Linkage Kits\"\u003ethrottle linkage kits\u003c\/a\u003e are designed for use with either mechanical or drive-by-wire throttle systems.\u003c\/p\u003e\u003cp\u003eThe new 600-Series underfoot pedals are also available in a \u003ca href=\"https:\/\/tiltonracing.com\/product\/600-series-2-pedal-underfoot-assembly\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e2-pedal\u003c\/a\u003e (brake\/throttle; P\/N 72-618) configuration. The 2-pedal version is ideally suited for newer vehicles with dual clutch transmissions, and therefore no need for a clutch pedal.\u003c\/p\u003e\u003cp\u003eThe underfoot pedals are designed to accept Tilton’s \u003ca href=\"https:\/\/tiltonracing.com\/?page_id=586\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"76-Series Master Cylinders\"\u003e76-Series master cylinders\u003c\/a\u003e.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged aluminum pedals engineered for high rigidity and low weight\u003c\/li\u003e\n\u003cli\u003eLightweight and rigid aluminum frame designed to accept customer supplied false floor\/heal rest\u003c\/li\u003e\n\u003cli\u003eLarge 7\/16”-20 balance bar minimizes flex and provides a solid pedal feel\/response\u003c\/li\u003e\n\u003cli\u003eAluminum foot pads can be adjusted vertically, horizontally, and an angle to suit individual driver preferences\u003c\/li\u003e\n\u003cli\u003eAdjustable pedal ratio (5.4:1-6.9:1) enables fine-tuning of the braking system\u003c\/li\u003e\n\u003cli\u003eLow friction oil-impregnated bushing on pedal pivots\u003c\/li\u003e\n\u003cli\u003eAccepts Tilton \u003ca href=\"https:\/\/tiltonracing.com\/?page_id=586\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"76-Series Master Cylinders\"\u003e76-Series master cylinders\u003c\/a\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeighs 6.4 lbs (does not include master cylinders)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not designed for use with ABS systems.  See \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/800-series-racing-pedal-assemblies\/\"\u003e800\/850-Series Pedal Assemblies\u003c\/a\u003e and \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/900-series\/\"\u003e900-Series Pedal Assemblies\u003c\/a\u003e\u003c\/strong\u003e\u003cstrong\u003e.\u003c\/strong\u003e”\u003c\/p\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039848550,"sku":"RCP TIL72-616","price":1118.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/Tilton_600-Series_3-Pdl_FloorMount_Forward_right.jpg?v=1770536439"},{"product_id":"tilton-600-series-2-pedal-underfoot-assembly-brake-clutch","title":"Tilton 600-Series 2-Pedal Underfoot Assembly Brake \u0026 Clutch","description":"\u003cp\u003e600-Series 2-pedal Underfoot Assembly (Brake \u0026amp; Clutch) is perfect for racers who need additional space in the cockpit. Unlike traditional floor-mount pedal assemblies with forward-facing master cylinders, the underfoot pedal assembly features a rear-facing master cylinder arrangement. This enables the pedals to be mounted further forward, which allows a greater range of driver seating positions. This, along with over a hundred pedal pad configurations and an adjustable pedal ratio, makes the new underfoot pedal assembly compatible with just about any racer in any application.\u003c\/p\u003e\u003cp\u003eForged aluminum pedals and an aluminum frame give the 600-Series underfoot pedal assembly rigid and lightweight support for even the most grueling applications. Included with the assembly is a large 7\/16”-20 balance bar (\u003ca href=\"https:\/\/tiltonracing.com\/?page_id=1243\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"600-Series Balance Bar Assembly\"\u003eP\/N 72-260\u003c\/a\u003e), which minimizes flex and provides a solid pedal feel. Action on the pedals is kept smooth and consistent with low friction oil-impregnated bushings on the pedal pivots. For additional customization, the 600-Series 2-pedal underfoot assembly is also compatible with customer-supplied false floors and heel rests.\u003c\/p\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039881318,"sku":"RCP TIL72-617","price":1055.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/72-617_New.jpg?v=1770536441"},{"product_id":"tilton-600-series-2-pedal-underfoot-assembly-brake-throttle","title":"Tilton 600-Series 2-pedal Underfoot Assembly Brake \u0026 Throttle","description":"\u003cp\u003eTilton’s 600-Series 2-pedal Underfoot Assembly (Brake \u0026amp; Throttle) is perfect for racers who need additional space in the cockpit. Unlike traditional floor-mount pedal assemblies with forward-facing master cylinders, the underfoot pedal assembly features a rear-facing master cylinder arrangement. This enables the pedals to be mounted further forward, which allows a greater range of driver seating positions. This, along with over a hundred pedal pad configurations and an adjustable pedal ratio, makes the new underfoot pedal assembly compatible with just about any racer in any application. The 2-pedal brake\/throttle assembly is ideally suited to newer cars with dual-clutch transmissions, and therefore no need for a clutch pedal.\u003c\/p\u003e\u003cp\u003eForged aluminum pedals and an aluminum frame give the 600-Series underfoot pedal assembly rigid and lightweight support for even the most grueling applications. Included with the assembly is a large 7\/16”-20 balance bar (\u003ca href=\"https:\/\/tiltonracing.com\/?page_id=1243\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"600-Series Balance Bar Assembly\"\u003eP\/N 72-260\u003c\/a\u003e), which minimizes flex and provides a solid pedal feel. Action on the pedals is kept smooth and consistent with low friction oil-impregnated bushings on the pedal pivots. For additional customization, the 600-Series 2-pedal underfoot assembly is also compatible with customer-supplied false floors and heel rests. The optional Tilton \u003ca href=\"https:\/\/tiltonracing.com\/?page_id=1259\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"Throttle Linkage Kits\"\u003ethrottle linkage kits\u003c\/a\u003e are designed for use with either mechanical or drive-by-wire throttle systems.\u003c\/p\u003e\u003cp\u003eThe new 600-Series underfoot pedals are also available in a \u003ca href=\"https:\/\/tiltonracing.com\/product\/600-series-3-pedal-underfoot-assembly\/\" rel=\"noopener noreferrer\" target=\"_blank\"\u003e3-pedal\u003c\/a\u003e (P\/N 72-616) configuration for use with traditional single-clutch transmissions.\u003c\/p\u003e\u003cp\u003eThe underfoot pedals are designed to accept Tilton’s \u003ca href=\"https:\/\/tiltonracing.com\/?page_id=586\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"76-Series Master Cylinders\"\u003e76-Series master cylinders\u003c\/a\u003e.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eForged aluminum pedals engineered for high rigidity and low weight\u003c\/li\u003e\n\u003cli\u003eLightweight and rigid aluminum frame designed to accept customer-supplied false floor\/heal rest\u003c\/li\u003e\n\u003cli\u003eLarge 7\/16”-20 balance bar minimizes flex and provides a solid pedal feel\/response\u003c\/li\u003e\n\u003cli\u003eAluminum foot pads can be adjusted vertically, horizontally and in angle to suit individual driver preferences\u003c\/li\u003e\n\u003cli\u003eAdjustable pedal ratio (5.4:1-6.9:1) enables fine tuning of braking system\u003c\/li\u003e\n\u003cli\u003eLow friction oil-impregnated bushing on pedal pivots\u003c\/li\u003e\n\u003cli\u003eAccepts Tilton \u003ca href=\"https:\/\/tiltonracing.com\/?page_id=586\" rel=\"noopener noreferrer\" target=\"_blank\" title=\"76-Series Master Cylinders\"\u003e76-Series master cylinders\u003c\/a\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eWarning: Not designed for use with ABS systems.  See \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/800-series-racing-pedal-assemblies\/\" rel=\"noopener\" target=\"_blank\"\u003e800\/850-Series Pedal Assemblies\u003c\/a\u003e and \u003ca href=\"https:\/\/tiltonracing.com\/product-category\/brake\/pedals\/900-series\/\" rel=\"noopener\" target=\"_blank\"\u003e900-Series Pedal Assemblies\u003c\/a\u003e\u003c\/strong\u003e\u003cstrong\u003e.\u003c\/strong\u003e”\u003c\/p\u003e","brand":"TILTON","offers":[{"title":"Default Title","offer_id":43359039914086,"sku":"RCP TIL72-618","price":898.0,"currency_code":"NZD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/files\/72-618.jpg?v=1770536444"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0029\/9696\/1392\/collections\/600-series-logo-768x768.jpg?v=1783549053","url":"https:\/\/racerproducts.co.nz\/collections\/tilton-600-series-racing-pedal-assemblies.oembed","provider":"Racer Products","version":"1.0","type":"link"}