Choose your Brembo Upgrade System
The GT-R (Gran Turismo Racing) system has been designed for the driver who demands exceptional performance on the street and on the track.
The GT-R monobloc calipers are machined entirely from billet with a nickel plated race finish to provide both the features and benefits of a racing brake system. This includes improved stiffness and thermo-mechanical resistance which is critical in high-performance applications.
The system includes 4 or 6-piston monobloc calipers, 2–piece floating brake disc assemblies, a selection of high performance or racing friction materials and all the necessary hardware to insure seamless installation.
Effective range of brake systems
Brembo at a glance
The Brembo High Performance (HP) Program is the direct result of winning over 200+ World Championships and decades of designing brake systems for the worlds top supercar manufacturers. Brembo Dominated Motorsports: Formula 1, World Rally Championship (WRC), NASCAR, Champ Car World Series, Indy Racing League (IRL), American Le Mans Series (ALMS), Grand Am Rolex Sports Car Series, Speed World Challenge, and FIA GT Championship.
Brembo has a unique relationship working directly with automotive manufacturers to develop high performance braking solutions specifically for your vehicle. You can rest assured that every system designed by Brembo is specifically tuned for your vehicle like no other braking system on the market. Brembo supplies over 30 automotive manufacturers including Acura, Aston Martin, Audi, BMW, Cadillac, Chrysler, Dodge, Ferrari, Ford, General Motors (GM), Honda, Infiniti, Jaguar, Jeep, Lamborghini, Land Rover, Lexus, Maserati, Mercedes-Benz, Mitsubishi, Nissan, Porsche, and Subaru.
Brembo uses its own foundries in the industrial process, whereby bringing a thorough knowledge of metallurgy to its design know-how which also creates further synergy in the optimization of the production cycle. The research and development phase is flanked by the testing phase which involves static, comfort and road testing and dynamic tests on test benches. Brembo brakes are manufactured under quality and environmental ISO 9004 and ISO 14000 management standards which puts Brembo in a league of its own in high performance braking.
Brembo GT Systems at-a-glance
GT is the most popular system
offered by Brembo
- Calipers, Discs, Brake Lines, Caliper Mounting Brackets and Brake Pads
- Billet 5-axis Machined, Aerospace Aluminum-alloy, Monobloc
- 4, 6
- Ventilated Stainless Steel Insert, Recessed Twin Seal
- Nickel Plated
- Type III
- Type V
Brembo High Performance GT/GT-R Systems are designed to give you the advanced technology behind Brembo racing systems without compromising the driveability and comfort features of an OE Brembo system.
|Non-Brembo OE Systems||
Non-Brembo OE systems typically use a heavy, low-grade iron rotor and a flexible sliding caliper that severely limits performance.
|Brembo OE Systems||
Brembo OE systems are superior to non-Brembo OE systems by the use of opposed, multi-piston aluminum fixed mount calipers, and high carbon or CCM discs.
GT/GT-R systems are revolutionary in their design and performance, and no other braking company is able to offer this level of performance and range of vehicle applications. The GT/GT-R systems exemplify Brembo’s dominance as a world leader in high performance braking.
|Brembo Racing Systems||
Racing systems are designed for the sole purpose of winning championships. This pinnacle of performance is not bound by the comfort and anti-noise features that are built into Brembo GT and GT-R Systems.
ATTN: “Effective Range of Brake Systems” illustration is meant to be a general guideline. Please contact your Brembo authorized dealer to determine the proper brake system for your vehicle and intended use.
Brembo engineers design each brake upgrade specifically for your vehicle and driving conditions.
Optimum brake balance is achieved by combining Brembo’s thorough knowledge of OEM braking systems and use of an unlimited range of caliper, piston, and disc combinations.
Brembo brake upgrades are easy to install and designed to work seamlessly with your vehicle’s stock master cylinder, ABS, and traction control system.
THE BREMBO DIFFERENCE: Improved pedal feel, modulation, and control of braking performance from initial application through ABS intervention.
Monobloc: a single integral unit or 1-piece design that optimizes the ratio between mechanical stiffness and weight.
Most OE calipers are of a sliding design, with piston(s) only located on the inboard side of the disc. While this type of caliper is inexpensive to manufacture, it is generally extremely heavy, and inherently flexible under braking, which significantly degrades performance. Conversely, Brembo’s calipers are a fixed radial or axial mount design with opposed pistons and constructed from aluminum alloy. Despite being much larger and many times stiffer than the sliding OE caliper, they are also much lighter which benefits overall vehicle dynamics.
GT-R’s twin seal design provides race level performance without compromising the low maintenance aspects of a Brembo OE system. Ventilated stainless steel piston inserts are incorporated for heat rejection.
High performance brake pads
Each Brembo system is delivered with pre-loaded calipers. Brake pads are selected vehicle specific for high performance.
Wide range of pads to choose from.
Quick Release Pad Retaining System: Incorporates anti-rattle feature (pictured) to eliminate noise and is designed for quick and easy pad changes.
Caliper mounting brackets
All Brembo caliper mounting brackets are designed vehicle and system specific. They are precision milled from superior quality billet materials to ensure a precise fit and meet the strength requirements of high performance driving conditions. Brembo brackets are also further analyzed and tested to ensure fatigue life.
Brembo caliper mounting brackets are also anodized to provide an attractive finish.
Part numbers are clearly laser etched along with an unique serial number (S/N) for each part. Pictured, are a few examples of axial and radial mount bracket designs.
Brembo 2-piece discs
Through Brembo’s comprehensive understanding of materials and advanced design capabilities, Brembo’s 2-piece discs are designed to be as lightweight as possible without compromising strength or longevity. Achieving this level of design is a capability that sets Brembo apart.
By manufacturing the center section out of precision milled billet aluminum, a great deal of weight can be saved in this key location. This reduces both unsprung and rotating weight which benefits handling, acceleration, and overall vehicle dynamics.
Brembo discs are coated with zinc ("gold" color) to provide an attractive corrosive resistant finish.
Superior metallurgy and exceptional engineering allow Brembo discs to exceed in the most demanding conditions. Their advanced cast iron alloy lasts longer than any disc in the high performance and racing market.
- Cross drilled discs run at slightly lower temperatures due to added air flow through the surface of the disc where heat is generated.
- They are also highly effective in wet conditions and shedding debris from the disc to ensure a clean braking surface.
- Improve pad “bite”, improve wet weather performance, continuously refresh the brake pad.
- Slotted discs are recommended when using race pad materials or compounds. the vehicle is submitted to extreme braking duties such as towing or hauling heavy loads.
- Improve pad “bite”, improve wet weather performance, continuously refresh the brake pad.
Disc Thermal Capacity
A Mass: The area located in the outer ring of the disc (shown in orange), dictates thermal capacity. This consists of annulus, width, diameter, air gap, and vane design.
B Annulus: The area between two concentric circles. This dimension directly correlates to the friction surface area of the brake pad.
C Disc Width: The overall thickness of the disc. Calipers are designed for a specific width.
D Air Gap: The area located between the rotor plates surface is airgap. The amount of airgap is a crucial factor in channeling airflow.
E Vane Design: Exclusive venting system that improves cooling capacity which increases resistance to brake fade.
Brake systems are designed to operate best within a prescribed temperature range. While modern high performance friction materials broaden this temperature range, it is critical that the brake disc in a system has adequate thermal capacity.
Thermal capacity, or heat storage capacity, is determined by how much weight or mass is located in the outer ring section of the disc. This is the area where the friction surface of the disc meets the internal vanes (orange colored area in the diagram shown). The more mass located in this area, the more thermal capacity a disc has.
Airflow / Cooling
The curved vane disc is directional, and curved vane disc must be installed with the vanes running back from the inside to the outside diameters in the direction of rotation. Orienting the disc in the manner creates a centrifugal pump. The rotation of the disc causes air to be pumped from the center of the disc, through the vanes, and out through the outside diameter of the disc. This greatly enhances the disc’s ability to dissipate heat. Additionally, all of Brembo’s slotted discs are directional, regardless of the vane geometry. The discs should be installed such that the end of the slot nearest the outer edge of the disc contacts the pad first.
TECH NOTE: It is a popular misconception that the cross drill pattern determines the direction of rotation of the disc. In truth, for an internally vented drilled disc, the geometry of the vanes dictates the direction of rotation.
The coupling between the bell, disc and disc hardware has been carefully studied by Brembo to maximize performance, comfort, and longevity. These proprietary disc hardware systems were developed though extensive involvement in professional motorsports and supplying the worlds top OE auto manufacturers.
How it works
During braking, torque is transmitted from the disc to the bell through a fastener called a bobbin. This type of mounting system is designed to allow a specific amount of float in both radial and axial directions. This allows the disc to expand and contract under high temperature which reduces stress and increases longevity of the related components.
Brembo’s unique anti-rattle disc hardware utilizes a spring fastener in order to slightly preload the assembly which eliminates the noise generally associated with floating discs.
The floating 2-piece anti-rattle disc hardware system, commonly used in high performance braking systems, was actually developed by Brembo back in the mid 90’s. This innovation was initially engineered exclusively for the McLaren F1 supercar which is why the hardware is often nicknamed the “McLaren” spring.
Goodridge is the leading line supplier to OE manufacturers and championship winning race teams worldwide. With the tightest bend radius in the industry and the lowest rate of expansion, you can be assured that every inch of pressure from the pedal is transfered directly to where it counts – the caliper. Goodridge is the only brake hose system approved for use in every country in the world and it’s guaranteed for life.
Goodridge High Performance Brakeline race-bred street brake lines are constructed from the finest quality hose, consisting of a PTFE inner hose covered by braided stainless steel. In addition to providing a more responsive and firm brake pedal by eliminating the “spongy” feel that often accompanies stock rubber brake lines, High Performance Brakelines are abrasion and corrosion resistant to stay good looking for a long time to come.
Back to top